Home Automation 68A00-1 - Manual (Page 25)

<Active-X for Schedule setting>
If video is not displayed, ensure that the camera and network cables are properly
connected on 68A00-1 unit. If trouble persists, please refer to Troubleshooting in
Appendix 1.
1.2 User Login
The default login for users is ’guest’ for both ID and Password. The system
administrator can modify the ID and Password and assign an individual ID and
Password to each user.
The login page allows the user to choose between the 68A00-1 Viewer and the
68A00-1 Player. The 68A00-1 Viewer allows users to access live monitoring and
viewer controls. The 68A00-1 Player allows users to access file playback which is
described in detail in the next chapter.
2. After power-up, the READY LED should be lit.
3. Connect to the 68A00-1 via the browser as follows:
a. Open Internet Explorer.
b. Enter the IP address in the address bar of the browser as shown below:
http://(IP address)
For example:
http://192.168.1.2
When connected, the On-Air LED should be lit.
23
68A00-1 NETWORK DIGITAL VIDEO RECORDER