Home Automation 68A00-1 - Manual (Page 51)

Follow these steps for schedule reservation and event notification:
1. Check the type of Event and create the schedule (multiple selections are possible)
: Left mouse button: Draw
: Right mouse button: Erase
2. Create an event
3. Assign the video channel to record
4. Specify the action and notification triggered by that event
Network Fail
Assign the server to generate the “Network Fail” event when the connection is lost
between the 68A00-1 and this server.
Storage Full
When storage is full, you can choose Overwrite or Stop Recording.
Relay
Up to four alarm relays are controlled according to the event triggered.
Duration
How long the relay will remain engaged once triggered.
Record channel
Up to four channels at the same time. Video images are registered to record at
the single event triggered.
Pre-Alarm and Post-Alarm
Select as value up to 60 seconds pre-event and post-event period to record.
Type
Sensor types must be designated as either “Normally Open (NO)” or “Normally
Close (NC)”. This is determined by the type of device that is sending the signal to
the 68A00-1 Sensor input.
49
68A00-1 NETWORK DIGITAL VIDEO RECORDER