Home Automation 68A00-1 - Manual (Page 48)

2.4 Pan/Tilt/Zoom (PTZ) Setup
* Channel selection
Choose the channel for PTZ setup from the drop-down list.
* Pan/Tilt/Zoom Device Settings
Enable
Enables PTZ control for the selected channel.
Manufacturer (Model)
Choose the manufacturer and the model for PTZ camera from the drop-down list.
Device ID
Enter the ID of the PTZ camera. This ID should match the physical ID set on the
PTZ camera. Please refer to the PTZ camera manufacture’s instruction manual
for setting up physical ID.
UART Settings
These are the communications protocols that are used to communicate with the
PTZ cameras. Please refer to PTZ camera manufacture’s instruction manual for
appropriate information.
Pan Speed
Enter the speed for the dome to move left and right. This range may vary from
device to device.
46
68A00-1 NETWORK DIGITAL VIDEO RECORDER