Honeywell 191108AJ - Manual (Page 10)

10 69-0643—1
Programming
You can program your thermostat to automati-
cally lower and raise the temperature one or
more times every 24 hours, depending on the
number of program pins used.
Before setting your program
Notice the slots on the program dial (Fig. 4).
The dial is slotted for the program pins that can
be inserted at 10-minute intervals.
■ Lift thermostat flip-up cover and you will find
the 24-hour program dial. The slots on the
program dial (Fig. 4) are for the program pins
that can be inserted at 10-minute intervals.
■ Three red and three blue program pins are
included with your thermostat. The red pins
start the high-temperature period; the blue
pins start the low-temperature period. A
heating program has been preprogrammed. A
red pin is inserted at 6:00 AM for high
Fig. 4—Program components.
24-HOUR PROGRAM DIAL
(GRAY AREA FOR NIGHT SETTINGS)
FLIP-UP
COVER
PROGRAM
PINS
THERMOSTAT
COVER
PROGRAM
PIN SLOT
PROGRAM INDEX WHEEL
TIME INDICATOR ARROW
PROGRAM
PIN STORAGE
M7348