Honeywell 191108AJ - Manual (Page 17)

17 69-0643—1
No cooling. — System switch may be in OFF Move switch to COOL position.
or HEAT position.
— Fuse or circuit breaker. If fuse is blown or breaker tripped,
replace or reset. If fuse blows again,
call the heating and air conditioning
dealer.
— Condenser switch position. Move to ON position.
Located outdoors and may
be turned off.
— Thermostat connections. Turn off power to cooling system.
Check for correct terminal
hookups. Repair any frayed
or broken wires. Firmly
tighten all terminal screws.
— Other. Contact a qualified service technician
for assistance.
Troubleshooting (Continued)
(continued)
1
Problem Check Action