Hampton Direct HI300 - Manual (Page 25)

Hampton HI300 Wood Cast Insert 25
LATCH ADJUSTMENT
The door latch may require adjustment as the door gasket material compresses after a few fi res. Removal of spacers will allow the latch to be moved
closer to the door frame, causing a tighter seal.
1) Remove the Latch Assembly from the unit by undoing the outer 2
bolts.
2) Remove the Latch from the Mounting Bracket by undoing the inner
2 bolts.
Latch
Assembly
Latch Assembly
removed from unit.
3) Remove necessary amount of spacers sitting on the Mounting
Bracket.
Ensure an equal amount of spacers are removed from both top and
bottom.
Mounting
Bracket
Latch
4) Re-secure Latch to Mounting Bracket using 2 bolts.
Mounting
Bracket
Spacers
Latch Assembly re-assembled with
spacers removed.
5) Re-secure the Latch Assembly to the unit using 2 bolts.
MAINTENANCE