Home Dynamix DW 3512 - Manual (Page 18)

Dynamix DW 3512 Technical Manual V1.00
Copyright © 2007 Dynamix Pro., Ltd. All right reserved. 18
„ LAN Interface Setup
This page is used to configure the parameters for local area network which connects to the LAN
port of your Access Point. Here you may change the setting for IP address, subnet mask, DHCP,
etc…
¾ IP Address: Set IP address of LAN interface.
¾ Subnet Mask: Set subnet mask of LAN interface.
„ WAN Interface Setup
This page is used to configure the parameters for Internet network which connects to the WAN port
of your Access Point. Here you may change the access method to static IP, DHCP, PPPoE or PPTP
by click the item value of WAN Access type.
¾ Static IP: Set WAN interface as Static IP mode.
1) IP Address: set IP address of WAN interface.
2) Subnet Mask: set subnet mask of WAN interface.
3) Default Gateway: set default gateway of WAN interface.
4) DNS: set Domain Name Server for WAN interface.