Home Dynamix DW 3512 - Manual (Page 24)

Dynamix DW 3512 Technical Manual V1.00
Copyright © 2007 Dynamix Pro., Ltd. All right reserved. 24
4) WPA2 Mixed
•
Pre-Shared Key Format: Select Pre-Shared Key Format as Passphrase or Hex (64
characters).
•
Pre-Shared Key: set pre-shared key manually.
Operation Mode
You can setup different modes to LAN and WLAN interface for NAT and bridging function. DW3512 provide all
3 primary modes and 4 extended modes. Here you can find 3 primary modes, including: 1) Gateway mode, 2)
Bridge mode, 3) Wireless ISP. Another 4 extended modes are changes from these 3 mainly modes and plus
some application, including: 1) Client mode, 2) WDS Repeater Mode, 3) Universal Repeater mode, 4) WISP +
Universal Repeater mode.
„ Gateway: In this mode, the device is supposed to connect to internet via ADSL/Cable Modem. The
NAT is enabled and PCs in four LAN ports share the same IP to ISP through WAN port. The
connection type can be setup in WAN page by using PPPOE, DHCP client or static IP.
„ Bridge: In this mode, all ethernet ports and wireless interface are bridged together and NAT
function is disabled. All the WAN related function and firewall are not supported
„
Wireless ISP: In this mode, all ethernet ports are bridged together and the wireless client will
connect to ISP access point. The NAT is enabled and PCs in ethernet ports share the same IP to
ISP through wireless LAN. You must set the wireless to client mode first and connect to the ISP AP
in Site-Survey page. The connection type can be setup in WAN page by using PPPOE, DHCP
client or static IP.