Home Dynamix DW 3512 - Manual (Page 28)

Dynamix DW 3512 Technical Manual V1.00
Copyright © 2007 Dynamix Pro., Ltd. All right reserved. 28
„ Security
This page allows you setup the wireless security. Turn on WEP or WPA by using Encryption Keys
could prevent any unauthorized access to your wireless network.
¾ Encryption: Set encryption as none, WEP, WPA, WPA2 or WPA2 Mixed.
¾ Set WEP Key: When encryption WEP is selected, you must set WEP key value.
1) Key Length: Set WEP key length as 64 or 128 bits.
2) Key Format: Set key format as ASCII (5 characters) if you are using ASCII characters.
Select HEX if you are using hexadecimal numbers.
3) Default Tx Key: Set default transmit key as key 1, 2, 3, or 4.
4) Encryption Key 1/2/3/4: user can set 4 sets of encryption keys. Keys 1-4 allow you to
easily change wireless encryption settings to maintain a secure network. WEP key is
either 5/10 or 13/26 ASCII/hexadecimal characters based on user select 64 or 128 bits
key length.
10 hexadecimal digits or 5 ASCII characters are needed if 64 bit WEP is used; 26
hexadecimal digits or 13 ASCII characters are needed if 64 bit WEP is used
¾ Use 802.1x Authentication: Check to use Radius 802.1x authentication and select
authentication level as WEP 64 bits or 128bits. In this case, please set Authentication
RADIUS Server information.
¾ WPA Authentication Mode: Select WPA authentication mode as Enterprise (RADIUS) or
Personal (Pre-Shared Key). If user select Enterprise mode, please fill in Authentication
RADIUS Server information. If user select Personal mode, please select Pre-Shared key