Harman Stove Company Advance Pellet Stove User Manual
Page 2
2
Automatic Operation
3
Manual Operation
5
ESP Control
7
Assembly & Installation
8
Venting
12
Maintenance
19
Trouble-Shooting
26
Specifications
27
Wiring Diagram
28
Feeder Parts
29
Parts List
30
Warranty
31
Introduction
Harman Stove Company
352 Mountain House Road
Halifax, PA 17032
Table of Contents
The Advance Pellet Heater
This heating appliance does not just have automatic ignition, it has total automatic temperature control. The Advance
uses a small room sensor rather then a wall thermostat for a more accurate temperature control.
The Advance's control panel is designed for easy and efficient operation. It has 2 automatic modes of operation and 2
manual modes of operation. The Advance's specially designed burn pot and the "Advance Igniter" Automatic Ignition
System, allow the unit to burn a large variety of biomass fuels with varying ash content. The Advance feed system has a
maximum feed rate of 6 lbs. per hour and a minumum (maintenance) feed rate of 1.0 lbs. per hour.
This 0 to 48,000 BTU pellet stove has an accordian style heat exchanger system that allows maximum surface area for
the most efficient heat transfer in a smaller firebox.
The unit has an easy to clean combustion system with an ash pan that holds ash from 1 ton of burned premium pellets.
This unit is equipped with several different safety devices which will be explained later in this manual.
SAFETY NOTICE: IF THIS HARMAN ADVANCE PELLET
STOVE IS NOT PROPERLY INSTALLED. A HOUSE FIRE
MAY RESULT. FOR YOUR SAFETY, FOLLOW THE INSTAL-
LATION DIRECTIONS. CONTACT LOCAL BUILDING OR
FIRE OFFICIALS ABOUT RESTRICTIONS AND INSTALLA-
TION INSPECTION REQUIREMENTS IN YOUR AREA.
Please copy yo ur se ria l
number from the label on your
stove to the box below.
SERIAL NUMBER