HiFi Works BlueSoleil - Manual (Page 19)

3 – Bluetooth Profiles
Step 1: Connect the Bluetooth enabled mouse to your computer following the
instructions in Chapter 2.4, Establish Connection.
Step 2: mputer following the
instructions in Chapter 2.4, Establish Connection. Before you can use
NOTE: T t the mouse or keyboard to your computer, the Found New
Hardware Wizard will automatically launch. In the first screen of the wizard, DO NOT
ard
3.7
rofile (LAP) allows users to access a Local Area Network (LAN)
lue
• Access a Local Area Network via a Bluetooth enabled LAN access point
A
the instructions in Chapter
2.4, Establish Connection.
Step 2: P Connection dialog, enter the user name and
password if necessary. Click Connect.
Use your com NCED USERS ONLY) -
he
instructions in Chapter 2.4, Establish Connection.
Step 2: lients (alternatively, you
can use DHCP to have the system dynamically assign IP addresses).
, then
select Properties (Figure 8).
Connect the Bluetooth enabled keyboard to your co
BlueSoleil to connect, you may need to press a button on the keyboard to
make it discoverable.
he first time you connec
INSERT ANY CD and click Next. Follow the next screens until you complete the wizard. If
the wizard reappears, cancel the wizard. You should be able to use the mouse or keybo
with your computer. The Bluetooth enabled mouse/keyboard can automatically re-connect
to your computer after you successfully establish the initial connection.
LAN Access
The Bluetooth LAN Access P
via a B
tooth enabled LAN access point.
Typical Usage
• Use your computer as a LAN Access Point
ccess a LAN via a Bluetooth enabled Access Point (AP) -
Step 1: Connect to the LAN AP's LAP service following
In the Connect Bluetooth LA
puter as a LAN Access Point (ADVA
Step 1: Start the Bluetooth LAN Access service on BlueSoleil following t
Specify any static IP addresses necessary for LAP c
In the Network Connections window, right-click Incoming Connection
BlueSoleil 1.4.9 Page 16