HiFi Works BlueSoleil - Manual (Page 35)

4 – BlueSoleil User Guides
Bonding Mode (Pairing Mode)
1) Accepts Bonding: allow other Bluetooth enabled devices to pair with your computer. If
the other device initiates a pairing procedure with your computer, each device must enter
the same passkey before they will be paired.
2) Does Not Accept Bonding: rejects pairing attempts initiated by other Bluetooth enabled
devices.
Hardware
View information about your Bluetooth hardware.
1) Manufacturer: The manufacturer of the local Bluetooth device.
2) HCI Version: The HCI version of the local Bluetooth device.
3) HCI Edition: The HCI edition of the local Bluetooth device.
4) LMP Version: The LMP version of the local Bluetooth device.
5) LMP Subversion: The LMP subversion of the local Bluetooth device.
4.3 Security Configuration
Use the Security Configuration screens to specify the security settings of your local device.
4.3.1 Pair / Unpair Devices
Once a remote device has paired with your computer by exchanging passkeys, passkeys will no
longer be required for further connections between your computer and the device.
4.3.1.1 How to Pair with Another Device
Automatically: If a passkey is required for connection, the devices will be paired automatically
the first time they successfully exchange passkeys and connect. After a device has successfully
paired with your computer, the remote device icon in the Main Window will have a red checkmark
next to it.
Manually: In the Main Window, right click on the device icon, and in the pop-up menu, select
Pair Device. In the Enter Bluetooth Passkey screen, enter the same passkey that you enter on the
remote device. After a device has successfully paired with your computer, the remote device icon
will have a red checkmark next to it.
4.3.1.2 How to Unpair with Another Device
In the Main Window, right-click on the device icon and in the pop-up menu, select Unpair. The red
checkmark next to the device icon will disappear.
BlueSoleil 1.4.9 Page 32