HiFi Works BlueSoleil - Manual (Page 7)

2 – Basic Operations
2 Basic Operations
2.1 BlueSoleil Installation
IMPORTANT! If you have any Windows 2000 or XP Bluetooth software
previously installed on your computer, you must completely remove it before
installing BlueSoleil.
If DigiAnswer is installed on your computer, run the Scrubber.exe located on the
CD. It will remove all DigiAnswer artifacts which would interfere with BlueSoleil
functionality.
2.1.1 Socket Bluetooth USB Adapter
IMPORTANT! Install the BlueSoleil software BEFORE you plug the Socket
Bluetooth USB Adapter in your system’s USB port!
1) Insert the BlueSoleil software installation disc into the CD drive of your computer.
2) Use My Computer or Windows Explorer to access the CD contents. Double-click on
SETUP.EXE.
3) The Choose Setup Language screen will appear (Figure 2). Choose the default language,
English, by clicking the OK button.
Figure 2: Choose Setup Language
NOTE: only the English version of BlueSoleil software is supported.
4) Follow the directions on your screen to install the software.
5) As prompted when software installation is complete, restart your computer.
6) Insert the USB adapter into the USB port of your computer. The Found New Hardware Wizard
will automatically launch:
BlueSoleil 1.4.9 Page 4