HiFi Works BlueSoleil - Manual (Page 9)

2 – Basic Operations
Figure 4: Choose Setup Language
NOTE: only the English version of BlueSoleil software is supported.
5) Follow the directions on your screen to install the software.
6) As prompted when software installation is complete, restart your computer.
You can also plug in the CF Bluetooth Card into your system AFTER BlueSoleil has been
installed. If the CF card has not been previously installed on your system, the Found New
Hardware Wizard will automatically launch.
1) Make sure the installation CD is still in your computer and follow the wizard to install the CF
card drivers.
2) After the Found New Hardware Wizard has successfully completed, you must pull the CF card
out of the slot and re-insert it in order for it to be recognized by your system.
2.2 Start BlueSoleil
1) To start BlueSoleil, click on the BlueSoleil icon on your desktop or go to Start | Programs | IVT
BlueSoleil | BlueSoleil.
NOTE: BlueSoleil will detect each insertion or removal of the USB adapter or CF card.
Alternatively, you can start BlueSoleil before plugging in the USB adapter or CF card.
2) The first time you use BlueSoleil, the Welcome to Bluetooth screen will appear. Assign your
Windows system a name and device type which will be visible to other Bluetooth enabled
devices. In most cases, you should leave the security setting checked. Click OK.
BlueSoleil 1.4.9 Page 6