HiFi Works BlueSoleil - Manual (Page 44)

10 – Regulatory Compliance
10 Regulatory Compliance
The Socket Bluetooth USB Adapter and Socket Connection Kit with Bluetooth Wireless
Technology are designed to be compliant with the rules and regulations in locations where they
are sold and will be labeled as required. These products are type approved — users are not
required to obtain license or authorization before using.
The products have been certified as conforming to technological standards. Therefore, the
following actions are punishable by law:
• Disassembly or modification of this product
• Removal of identification labels on the back of the product
The frequency used by these products is also used by industrial, scientific and medical devices,
such as microwave ovens, as well as wireless detectors for motion detectors, such as those
requiring licenses used on manufacturing lines or similar radio transmitters (all of these wireless
devices will be called “other wireless transmitters” below). Most modern electronic equipment
(e.g., in hospitals and cars), is shielded from RF energy. However, certain electronic equipment
is not.
1) Please ensure that all medical devices used in proximity to this device meet appropriate
susceptibility specifications for this type of RF energy.
2) In the unlikely event that there is electronic interference between this system and other
wireless transmitters, quickly change the location of operation or stop operating the unit (cease
signal transmission).
3) If other electrical interference or related problems occur, contact Socket technical support at
+1-510-744-2720.
Radio Frequency Interference Requirements
This device complies with part 15 of the FCC rules and Industry Canada RSS 210. Operation is
subject to the following conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
This equipment is also ETS EN300 328-2, ETS EN301 489-1 and ETS EN301 489-17 compliant.
These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at his or her own
expense.
BlueSoleil 1.4.9 Page 41