Hand Held Products 7900 Series - Manual (Page 202)

12 - 2 Dolphin® 7900 Series Mobile Computer User’s Guide
Dolphin 7900 HomeBase Parts and Functions
Front Panel
Terminal Well
Place the Dolphin terminal in this well to communicate with a host device, power the terminal, and charge its battery
pack. If the host device is a desktop computer that uses ActiveSync, synchronization begins immediately. While seated
in the terminal well, the main battery installed in the terminal charges. The HomeBase completely charges a battery
pack in less than four hours.
DOCK LED
Turns solid green when the Dolphin terminal is properly seated in the Dolphin HomeBase. When this light is on, the
terminal is connected to the base.
AUX Battery LED
Indicates status of the battery charging in the auxiliary battery well.
For information about charging a battery in the auxiliary battery well, see page 12-6.
COMM LED
This is the communication LED. It indicates the status of data transfer between the Dolphin terminal and the host device.
The color of this LED differs if the HomeBase is using the serial or USB port connection.
If using the serial port
This color… means…
Orange The auxiliary battery is charging.
Green The auxiliary battery has completed charging and is ready for use.
This color… means…
Red Serial data is being sent from the host device to the Dolphin HomeBase.
Green Serial data is being sent from the Dolphin HomeBase to the host device.
Terminal Well
DOCK
LED AUX
Battery
LED COMM
LED