Hand Held Products 7900 Series - Manual (Page 21)

Dolphin® 7900 Series Mobile Computer User’s Guide 2 - 7
Charging with Dolphin Peripherals
When the battery is installed in the terminal, you can insert the terminal into any one of the following peripherals to charge the
main battery pack:
• Dolphin 7900 HomeBase (see page 12-1)
• Dolphin 7900 Mobile Base (see page 13-1)
• Dolphin 7900 ChargeBase (see page 14-1) or the Dolphin 7900 Net Base
To fully charge the Li-ion battery before installing it in the terminal, use the
• Dolphin 7900 QuadCharger (see page 15-1)
• Auxiliary Battery Well of the Dolphin HomeBase (see page 12-6)
Step 4. Initialize the Mobile Computer
1. Power on the terminal. The decode LED lights and the scan LED blinks for approximately three seconds. Do NOT press any
keys while the terminal is booting up.
2. The terminal initializes and the splash screen appears for a few seconds. The Build numbers indicate the software versions.
3. The system performs a hard reset. When the display activates again, follow the instructions that appear.
Build 8.XX 8.XX 8.XX
Bootloader Kernel Keyboard