Hand Held Products 7900 Series - Manual (Page 88)

7 - 20 Dolphin® 7900 Series Mobile Computer User’s Guide
Com Port Assignment Table
The Dolphin 7900 terminal ships with the Com ports assigned as follows:
Opening the Connections Manager
To open the connections manager, tap Connections. The connection manager opens displaying the Tasks tab.
The connections manager consists of two tabs: Tasks and Advanced.
Task tab The Task tab enables you to configure and manage your My Work Network settings. Click on the link
to setup or manage existing network accounts.
Com
Port
Assignment
1
Serial port; this is the 17-pin connector on the bottom panel.
See Mechanical Connector on page 3-8.
2
Bluetooth Module
If there is no Bluetooth hardware installed on the terminal, this com port is unassigned.
3 Raw Infrared
4 Unassigned
5 USB virtual serial port
6
IrDA, if IrDA is enabled. If IrDA is disabled, this com port becomes available.
See Verify That the IrDA Port is Enabled on page 8-6.
7, 8, 9
Unassigned; these are virtual com ports that are available for selection only when
connecting to devices that use virtual com ports, such as Bluetooth.