Hitachi Koki USA 52 - Manual (Page 109)

3-71
10. Selecting the Job Functions
Chapt
e
r 3
M
a
king
Copi
es
Reserve
As the copier completes scanning for a regular copy job, it is capable of scanning for another job which is
held in reserve. When the copier completes the print cycle for the first job, it automatically starts the print
cycle for the reserved job.
* By job, we mean a sequence of operation from original loading to the end of the print cycle.
NOTE
“RESERVE” does not function when Date Controller/Key-Counter is installed to copier.
Touch on the Touch Panel.
Load the originals and make the necessary
settings.
Press the Start key and the copier starts
scanning the originals and the job is
reserved.
NOTES
• Reserve is possible when the copier is
equipped with an optional Hard Disk Drive
Kit.
• The number of copier jobs that can be stored
is a maximum of 5 or about 500 sheets of
Letter standard original.
• Jobs are printed in order of reservation.
• For a job to be reserved, Manual Bypass
cannot be selected.
Reserving a Job
1 Reserve
1155O387CA
2
1155O388CA
3