Hitachi Koki USA 52 - Manual (Page 149)

4-17
5. User’s Choice
Ch
a
p
te
r 4
U
sin
g
th
e U
til
it
y M
o
d
e
Select whether to give (“ON”) a warning message
or not (“OFF”) when the original is placed out-of-
alignment on the Glass.
The initial setting is “OFF.”
Select whether to enable (“ON”) a copy cycle or
not (“OFF”) when it is initiated by pressing the
Start key with no originals placed on the Original
Glass or with an original smaller than the
detectable size placed on the Glass in the Auto
Paper mode.
If this function is turned “ON,” the copy cycle is
run using the paper loaded in the default paper
source. If turned “OFF,” a warning message
appears to instruct the user to select the paper.
The initial setting is “ON.”
Select the default copying order in the 4-in-1 mode
from among the following two:
The initial setting is .
Select the format for date printing, i.e.,
“punctuation,” “date format,” and “year.”
• “Punctuation” can be either XX/XX/XX or
XX.XX.XX.
The initial setting is XX/XX/XX.
• “Date Format” can be either '98/12/27, 12/27/'98,
DEC/27/'98, 27/12/'98, or 27/DEC/'98.
The initial setting is '98/12/27.
• “Year” can be either ’yy or yyyy.
The initial setting is ’yy.
Enter the position at which to print the date by X
and Y using the
or keys. The
dimension can range from 3/16
″
~1-9/16
″
.
The initial setting is X: 1/4
″
, Y: 3/4
″
.
Enter the position at which to print the page
number using the
or keys. It can
range from 3/16
″
~1-9/16
″
. from the bottom of the
page.
The initial setting is 1/4
″
.
3/6
Realign Warning
“Small” Originals
4in1 Copy Order
Date Printing Format
1 2
3 4
1 3
2 4
1 2
3 4
Date Printing Position
Page Number Position