Hitachi Koki USA 52 User Manual
Page 151
4-19
5. User’s Choice
Ch
a
p
te
r 4
U
sin
g
th
e U
til
it
y M
o
d
e
Set the date and time-of-day.
The initial setting is “1997/04/01, 00:00:00.”
Select the print exposure level from among
“Lighter,” “Normal,” or “Darker.”
The initial setting is “Normal.”
Select the configuration either as a “Copier” or
“Printer.”
The initial setting is “Copier.”
Select the density level according to the original,
either Mode 1 or Mode 2.
The initial setting is “Mode 1.”
Mode 1: Used for the standard original, such as a
word-processor made document.
Mode 2: Effective in reproducing a pale original,
such as a faint pencil-written document.
<Only when the Fnisher FN-3 is mounted>
Select the output tray into which copied paper is to
be fed, either “Top Tray” or “Bottom Tray.”
The initial setting is “Top Tray.”
This mode is used only by the administrator of
your copier. When Administrator Mode is
selected, the copier prompts you to enter your
“Administrator's #.” The following functions can
be set only when the correct administrator number
is entered.
• Copy Track
• Max. Copy Sets
• Non-Auto Shut Off
The administrator number is set by the Technical
Representative. For more details, consult your
Technical Representative.
See p. 4-22 for setting the Copy Track function.
<Copy Track>
This function allows the administrator to keep
track of the number of copies made in the Copier
mode and the number of prints made in the Printer
mode for each account.
Select whether to turn “ON” or “OFF” the Copy
Track function for “Copier” or “Printer” and select
the Copy Track Method, either “100 Accounts” or
“1000 Accounts.”
The initial setting is “OFF.”
When “100 Accounts” is selected:
◆
Access Code:
You can program or change your access code
(for a max. of 100 accounts).
◆
Copy Limit:
You can limit the maximum number of copies
that can be made.
◆
Total Count:
Displays the count of the Total Counter. You can
also clear the counter.
◆
Size Count:
Displays the count of the Size Counter. You can
also clear the counter.
◆
Account No.:
Program or change the account number.
When “1000 Accounts” is selected:
◆
Total Count:
Displays the count of the Total Counter. You can
also clear the counter.
6/6
Date/Time Set
Print Exposure
Priority Device
Density (ADF)
Priority Offset Tray
Administrator Mode