Hitachi Koki USA 52 - Manual (Page 44)

3-6
2. Placing the Original
Chapt
e
r 3
M
a
king
Copi
es
Not Using the Document Handler
Different methods are used to place the original depending on its type. Use the procedure appropriate for
your original. If you are using a Document Handler, ☞p. 3-4
• If you place your original directly on the Original Glass, make sure that it is placed in the direction
illustrated below.
• If you need to place your original in a direction different from these examples, set the direction of the
original on the Touch Panel. ☞p. 3-37.
<Using plain paper or originals not suitable for the
Document Handler>
Raise the Document Handler.
Place the original face down on the Original
Glass.
Position the original in the left rear corner
with the
↑
marker on the scale.
Gently lower the Document Handler.
<Using transparencies and translucent paper for
the original>
Place the original in the same way as the
sheet originals.
Place a blank sheet of paper of the same size
over the original.
Gently lower the Document Handler.
1155O776AA
1155O777AA
Sheet Originals
1
2
1155O773AA
3
1155O774AB
Original Scale
4
Highly Transparent Originals
1
2
1155O775AA
Blank Sheet
of Paper
3