Hand Held Products 7450 - Manual (Page 38)

3 - 10
Charging the Battery Pack
You can charge the Dolphin’s main battery pack with one of the following methods:
• Place the battery pack in the Dolphin 7400/7450 terminal and then place the terminal in the terminal well of a charging/
communication cradle.
• Place the battery pack in the Dolphin Quad Battery Charger.
• Place the battery back in the Auxiliary Battery Well of the IntelliBase+.
Storing Batteries
To maintain top performance from batteries, follow the guidelines below when storing them:
Avoid storing batteries outside the specified range of -4 to 104° F (-20 to 40°C) or in extremely high humidity.
For prolonged storage, do not keep batteries stored in a charger that is connected to a power source.
During long-term storage, battery deactivation may tend to occur, which may cause charging to stop early during recharging after
storage. This issue can be handled by charging and discharging the battery several times. Also, the first charging after prolonged
storage may yield a lower than normal capacity. While this will vary depending on the storage conditions, charging and
discharging the battery several times will almost completely restore capacity.