hussmann GSVM - Manual (Page 17)

17
SHELF UPSLOPE ADAPTER KIT – This kit consists of (4) zinc coated wire adapters to
increase the two standard shelves’ upslope from 1 1/2º to 6º.
PRICE TAG MOLDING KIT – This kit consists of aluminum price tag molding for the
standard shelves. This molding will hold both 1" and 1.235" standard price tags. (Note
that the standard shelves accept 1.235” tags).
WIRE PRODUCT STOP KIT – This kit consists of a 2” high chrome plated open wire
stops for the standard shelf. This stop is mounted under tension and should not be
confused with the wire front in the partition kit.
WIRE PARTITION KIT – This is a free standing wire system, which attaches to the
standard shelves, and consists of a wire front (different from the Product Stop), two wire
sides, and two partitions from the front to back, all chrome plated and 3" high.
WIRE CROSS DIVIDER – This is a 3" high x 4" long divider that could be ordered to be
used with the Wire Partition Kit above, in whatever quantities are desired.
WIRE BASKET KITS – One kit is available to replace the top 13" shelf (s) and another is
available to replace the bottom 15" shelf. Each kit consists of a wire basket, (2) brackets,
and two dividers, which could also be used as ends. These parts are zinc plated. The
baskets have an 8" high back and a 4" sloped front.
WIRE BASKET DIVIDERS – These are additional dividers which can be used with the
Wire Basket Kit to obtain additional partitioned areas in the baskets.
ADDITIONAL LIGHTED SHELF – This consists of an additional 13" lighted shelf that
can be positioned between the two standard shelves. It is the same construction as the top
standard 13" shelf.
WARRANTY AND PARTS INFORMATION
IMPORTANT – Please read carefully to assure prompt and accurate service.
ORDERING PARTS REPLACEMENT –
Contact your nearest Hussmann Distributor.
Always specify model and serial number of cabinet.
If correct part number is not know, give a clear description of part itself and its function in the cabinet or
remote unit.