Hawking Technology 108G - Manual (Page 41)

41
MIMO Router if you want the router to be your
LAN client’s default gateway
Lease Time
The DHCP when enabled will temporarily give
your LAN clients an IP address. In the Lease
Time setting you can specify the time period that
the DHCP lends an IP address to your LAN
clients. The DHCP will change your LAN client’s
IP address when this time threshold period is
reached
IP Address Pool
You can select a particular IP address range for
your DHCP server to issue IP addresses to your
LAN Clients.
Note: By default the IP range is from: Start IP
192.168.1.25400 to End IP 192.168.1.25499. If
you want your PC to have a static/fixed IP
address then you’ll have to choose an IP
address outside this IP address Pool
Domain Name
You can specify a Domain Name for your LAN
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)