HP 2830 - Manual (Page 103)

Changing the default light/dark (contrast) setting
The contrast affects the lightness and darkness of an outgoing fax as it is being sent.
To change the default light/dark (contrast) setting
The default light/dark setting is the contrast that is normally applied to items that are being
faxed. The slider is set to the middle as the default setting.
1. On the device control panel, press M
ENU
.
2. Use the < or the > button to select Fax setup, and then press E
NTER
.
3. Use the < or the > button to select Fax Send setup, and then press E
NTER
.
4. Use the < or the > button to select Def. Light/Dark, and then press E
NTER
.
5. Use the < button to move the slider to the left to make the fax lighter than the original, or
use the > button to move the slider to the right to make the fax darker than the original.
6. Press E
NTER
to save your selection.
ENWW Changing the default light/dark (contrast) setting 87