HP 2830 - Manual (Page 119)

Inserting a dial prefix
A dial prefix is a number or group of numbers that are automatically added to the beginning
of every fax number you enter at the control panel or from the software. The maximum
number of characters for a dial prefix is 50.
The default setting is Off. You might want to turn this setting on and enter a prefix if, for
example, you have to dial a number such as 9 to get a telephone line outside of your
company telephone system. While this setting is activated, you can dial a fax number without
the dial prefix by using manual dial. For instructions, see
Using manual dial .
To set the dial prefix
1. On the device control panel, press M
ENU
.
2. Use the < or the > button to select Fax setup, and then press E
NTER
.
3. Press the > button once to select Fax Send setup, and then press E
NTER
.
4. Use the < or the > button to select Dial Prefix, and then press E
NTER
.
5. Use the < or the > button to select On or Off, and then press E
NTER
.
6. If you selected On, use the alphanumeric buttons to enter the prefix, and then press
E
NTER
. You can use numbers, pauses, and dialing symbols.
ENWW Inserting a dial prefix 103