Additional references, Typographical conventions, Management network – HP 445946-001 User Manual

Page 10

Advertising
background image

Accessing the switch

10

Additional references

Additional information about installing and configuring the switch is available in the following guides,
which are available at

http://www.hp.com/go/bladesystem/documentation

.

HP 10Gb Ethernet BL-c Switch User Guide

HP 10Gb Ethernet BL-c Switch Command Reference Guide

HP 10Gb Ethernet BL-c Switch ISCLI Reference Guide

HP 10Gb Ethernet BL-c Switch Browser-based Interface Reference Guide

HP 10Gb Ethernet BL-c Switch Quick Setup Instructions

Typographical conventions

The following table describes the typographic styles used in this guide:

Table 1

Typographic conventions

Typeface or

symbol

Meaning Example

AaBbCc123

This type depicts onscreen computer output and prompts.

Main#

AaBbCc123

This type displays in command examples and shows text

that must be typed in exactly as shown.

Main# sys

<AaBbCc123>

This bracketed type displays in command examples as a
parameter placeholder. Replace the indicated text with

the appropriate real name or value when using the
command. Do not type the brackets.

To establish a Telnet session, enter:

host# telnet <IP address>

Read your user guide thoroughly.

[ ]

Command items shown inside brackets are optional and

can be used or excluded as the situation demands. Do
not type the brackets.

host# ls [-a]

Management Network

The 10Gb Ethernet BL-c Switch is an integral subsystem within the overall BladeSystem. The BladeSystem

chassis includes an Onboard Administrator as the central element for overall chassis and control.
The 10GbE switch communicates with the Onboard Administrator through its internal management port
(port 17). The factory default settings permit management and control access to the switch through the

10/100 Mbps Ethernet port on the Onboard Administrator, or the built-in console port. You also can use

the external Ethernet ports to manage and control the 10GbE switch.
The 10GbE switch management network has the following characteristics:

Port 17—Management port 17 has a fixed configuration, as follows:

100 Mbps

Full duplex

Flow control: both

No auto-negotiation

Advertising