Configuring switch 1 (bbi example) – HP 445946-001 User Manual
Page 74
Advertising
Spanning Tree Protocol
74
Configuring Switch 1 (BBI example)
1.
Configure port and VLAN membership on Switch 1 as described in the “Configuring ports and
VLANs on Switch 1 (BBI example)” section, in the “VLANs” chapter of this guide.
2.
Add VLAN 2 to Spanning Tree Group 2.
a.
Click the Configure context button on the Toolbar.
b.
Select Spanning Tree Groups (click the underlined text, not the folder).
c.
Select a Spanning Tree Group number.
Advertising