Hamilton Electronics MICROLAB 8534-01 - Manual (Page 15)

MICROLAB ® Carousel User Guide (June 2003)
13
Operation
Installing the software
After your MICROLAB ® Carousel hardware is installed, you can install the
Hamilton MICROLAB ® Carousel Software.
Your MICROLAB ® Carousel software comes with an installation wizard that
guides you through the installation as it copies the program files to your
computer.
Before you begin the installation, make sure that you have closed any open
applications on your PC. Carousel software requires Windows 2000 (with
service pack 2 or higher) or Windows XP Professional, and 128 MB RAM
(minimum).
If installing SWAP software also, and SWAP version is 2.0 or less, SWAP
software must be installed first.
To install MICROLAB ® Carousel software:
1. Place the CD labeled “Hamilton MICROLAB ® Carousel Software”
into the CD drive on your PC.
2. The install program should run automatically. If it does not, select
Start > Run > (the CD-ROM drive identifier on your PC) \
Setup.exe. Click the OK button when the prompt appears.
The InstallShield Wizard starts when the Welcome to the InstallShield
Wizard for Carousel window appears (figure 12).
Figure 12: Welcome window