Hamilton Electronics MICROLAB 8534-01 - Manual (Page 16)

MICROLAB
®
Carousel User Guide (June 2003)
14
3. Click Next >. A Question window appears (figure 13) asking whether
desks icons are desired.
Figure 13: Question window
4. Click No. The Instrument Identification window appears. Click Yes
only if no other Vector components or instruments will be installed.
5. Click Finish. A Setup Status window appears, and then a Laboratory
Name window appears.
6. Type the name of your lab and click Next.
After MICROLAB ® Carousel software has completed its installation, the
InstallShield Wizard Complete window appears.
7. Click Finish to exit from MICROLAB ® Carousel Setup window.