Honeywell Chronotherm IV T8600D - Manual (Page 8)

T8600D CHRONOTHERM® IV DELUXE PROGRAMMABLE THERMOSTATS
69-1409—1 8
IMPORTANT
Review the settings to confirm that they match
the system. Press Run Program to exit the
Installer Setup. The thermostat has saved the
Installer Setup changes and initiated a reset in
order to operate using the new settings. Be sure
to set the current day and time immediately.
Setting Current Day and Time
1. Press Set Current Day/Time.
NOTE: On initial powerup or after an extended power
loss, 1:00 pm flashes on the display until a key
is pressed
.
2. Press Day until the current day is displayed.
NOTE: Sun=Sunday, Mon=Monday,
Tue=Tuesday, Wed=Wednesday,
Thu=Thursday, Fri=Friday, Sat=Saturday.
3. Press Time ∆ or Time ∇ until the current time is dis-
played.
NOTE: Tapping the Set Current Day/Time changes the
time in one-hour increments.
NOTE: If the current time is Daylight Savings Time,
press Daylight Time until DST is displayed.
4. Press Run Program.
.
Viewing or Resetting Timer Settings
When the thermostat activates a timer, the thermostat
flashes Filter until the timer resets.
1. Reset the timer by pressing the i key until the
expired timer is displayed.
2. Press the time key to reset the timer.
.
3. Press the Run Program key.
Humidifier
pad monitor. 44 0 Off 1, 2, 3 1 – 90 days
2 – 180 days
3 – 365 days
(Time is counted by
calendar days in heat
mode.)
Ultraviolet air
treatment
(UV) lamp
monitor. 45 0 Off 1 1 – 365 days
(Time is counted by
calendar days in any
mode.)
Table 3. Thermostat Installer Setup Options. (Continued)
Select
Installer Setup
Number
(Press Time ∆
key to
change)
Factory Setting
Other Choices
(Press or key to change)
Actual
Setting Display Description Display Description
M14619
Time Set Program
System Fan
Run Program
Hold Temp
Set Current Day/Time
Set Current
Day/Time
Wake Leave Return Sleep
Day Heat/Cool Settings
Daylight Time Copy
Set Day/Time
Mon
PM
M14620
Time Set Program
System Fan
Run Program
Hold Temp
Set Current Day/Time Wake Leave Return Sleep
Day
Day
Heat/Cool Settings
Daylight Time Copy
Set Day/Time
PM
Tue
M14621
Time Set Program
System Fan
Run Program
Hold Temp
Set Current Day/Time Wake Leave Return Sleep
Day
Time
Heat/Cool Settings
Daylight Time Copy
Set Day/Time
AM
Tue
M14622
Time Set Program
System Fan
Run Program
Hold Temp
Set Current Day/Time Wake Leave Return Sleep
Day Heat/Cool Settings
Daylight Time
Daylight
Time
Copy
Set Day/Time
AM
DST
Tue
M14623
Time Set Program
System Fan
Run Program
Run
Program
Hold Temp
Set Current Day/Time Wake Leave Return Sleep
Day Heat/Cool Settings
Daylight Time Copy
Wake
Room
System
Fan
Heat
Auto
AM
DST
Tue
M20243
Filter Days
M20244
Filter Days