Honeywell HRDP DVR - Manual (Page 62)

Operation
______________________________________________________________________________________________
62
Backup (Export)
Manual Export
Back up recorded data on a CD-RW, DVD-RW or connected USB device.
Tip Refer to the list of Approved USB Flash Drives in the Introduction
chapter.
1. Press the Backup key on the front panel or remote control and log in.
2. Insert media.
3. Select TARGET media.
Caution If you are using a new USB device to back up your data, you must
format it first as FAT32.
4. Set FROM and TO date and time.
5. Select CHANNELS to include in backup.
6. Select ESTIMATE to display estimated data size and free space available.
Note ESTIMATE must be selected first, before WRITE. If any backup
parameters are changed (Date, Time, Channels) you must select
ESTIMATE again.
7. Select WRITE to start backup.
Warning Do not shutdown the system during the backup process.
ESTIMATE WRITE HELP
TYPE
TARGET
FROM
TO
CHANNEL
RECORDING START TIME
2007/07/05 10:00:00
RECORDING END TIME
2007/07/17 09:59:59
REQUIRED SPACE
FREE SPACE
MANUAL EXPORT
DVD-RW
07/05/2007 12:55:47
07/17/2007 13:30:03
ALL
0.00MB
NONE