HONDA FL5540K1 - Manual (Page 12)

'RACTOR PREPARATION
HARDWARE BAG CONTENTS 2 hex nut
2 lockwasher
QNT'Y DESCRIPTION 4 hex nut
5 6 flat washer
2 x 30mm hex hd capscrew 4 lock washer
2 12mm x hex hd capscrew 4 8 x 1 hex hd capscrews
2 hex hd capscrew lockwasher
16
2 flatwasher
12 0 ga. machine bushing 2 hex hd capscrew
2 hex hd capscrew 2 5/16"
flatwasher
2 flat washer 2 2 hose clamp
2 hex hd capscrew 1 nylon tie
TRACTOR PREPARATION
The tractor must be equipped with the optional KIT and REAR
WEIGHT BOX which are sold separately.
DO NOT EXCEED THE RATING FOR MAXIMUM GROSS VEHICLE WEIGHT.
REFER TO OWNER'S MANUAL PROVIDED WITH TRACTOR.
The use of adequate rear counterweight is required for proper loader stability and provides
better traction and easier, more efficient loader operation.
Refer to Tractor Owner's Manual and Weight Box Installation Instructions for specific
recommendations on counterweighting tractor.
specific conditions may not safe use of loader at loader rating
or may require more carefully restricted operation at the rated load.
ROLL-OVER PROTECTION STRUCTURE (ROPS) SYSTEM
The tractor ROPS system must be in place and used properly to ensure adequate operator
protection.
LOADER HYDRAULIC SYSTEM
Follow recommendations in this operator's manual for hydraulic fluid specifications.
TRACTOR TIRES
Selection of tires should be restricted to tire recommendations as specified by your
Tractor owner's manual. Ag tires are recommended when using the front loader
TIRE INFLATION
Front tires must be maintained at the maximum recommended inflation with the added weight
of loader and material. Ag Tire pressure 34 psi.
Rear tires must be maintained at equal pressure within the recommended tire inflation range.
Ag Tire pressure 24 psi.
10