HONDA FL5540K1 - Manual (Page 25)

FRONT LOADER ASSEMBLY
HYDRAULIC FLUID SERVICING
You will need 6 1/2 quarts of a good grade
hydraulic fluid or ATF automatic transmission
fluid.
13. Remove filler plug and oil check screw on
back of left mast.
Fill with 4 quarts of
hydraulic fluid.
Start tractor engine and set speed at 1/2
throttle. Engage tractor front PTO and
operate loader lift and bucket cylinders at
least five or six times to purge the system
of air. Lower the loader to the ground.
Retract bucket cylinders by pulling back
on handle “B”.
Add 2 1 more quarts of hydraulic fluid or
until oil runs out of check hole. Replace oil
fill plug and oil check screw.
VALVE HANDLES
0 A
FILLER PLUG
OIL CHECK SCREW
23