HONDA FL5540K1 User Manual
Page 19
Advertising
SUB-FRAME
11.
Remove the jack from the front. Push
down on the front of the subframe while
pushing back. Slide the subframe into
the U-shaped channel. Place blocks un-
der the rear of the subframe.
12.
Lift
the front of the subframe with a jack
and slip it into the channel of the lower
cover. Insert
two
mounting pins
x
from inside sub-frame through
frame lower cover. Slip a
washer
over each mounting pin and insert the
clip pins through the holes.
Mounting pins have
a flat side that must
be pointing down.
MOUNTING PIN
FLAT
SIDE DOWN
17
Advertising