HONDA FL5540K1 User Manual
Page 24
Advertising
FRONT
LOADER ASSEMBLY
BUCKET ATTACHING
10.
Using the bottom holes on the bucket,
attach both sides of bucket to loader
frame. Use two each
x
3
inch pins and
clip pins.
Attach both cylinders to top holes on
bucket.
Use
two each
3/4
x 3
inch pins
and clip pins.
The loader is now ready for hydraulic fluid.
3/4
x 3in
PINS
BUCKET LEVEL INDICATOR INSTALLATION
1 1.
On the inside of the left side of the mainframe,
remove the top thrust washer and secure the
top of the bucket level indicator with
a
cotter
pin.
12. Remove the bottom thrust washer and se-
cure the bottom of the bucket level indicator
with a clip
pin.
22
Advertising