HONDA FL5540K1 - Manual (Page 5)

INTRODUCTION
INTRODUCTION
The purpose of this manual is to instruct you in maintaining and operating your HTA
Front Loader. Read it carefully; it furnishes information and instructions that will help you
achieve years of dependable performance. Some information may be general in nature due
to unknown and varying conditions. However, through experience and these instructions, you
should be able to develop operating procedures suitable to your particular situation.
“Right” and “Left” as used throughout this manual are determined by facing the direction the
machine will travel when in use.
The illustrations and data used in this manual are current at time of printing, but due to possible
in-line production changes, your machine may vary slightly in detail. Extra equipment that may
be shown on the machine is optional at extra cost. The manufacturer reserves the right to
redesign and change the machine as may be necessary without notification.
NOTE: Illustrations used in this manual may not show all safety equipment that is recommended
to ensure safe operation of Safety Section of this manual and the Tractor
Owner’s Manual for information concerning safety equipment. Consult your dealer for further
information.
SERIAL NUMBER and LOCATION
The serial number is important information about the machine, and it may be necessary to know
it before obtaining the correct replacement parts. The serial number is located on the right side
mast as shown.
REPLACEMENT PARTS
Use only Genuine Honda Replacement parts to repair this machine. Honda replacement parts
are available from your Honda Multi-purpose Tractor Dealer. To obtain prompt, efficient
service, always remember to give the dealer the following information:
-
Correct part description or part number.
-
Model number of your machine.
-
Serial number of your machine.
3