Hornet Car Security 700T - Manual (Page 20)

20 © 2001 Directed Electronics, Inc. Vista, CA
NOTE: Failure to insert the diodes at the correct point will allow the system to be disarmed by one
of the power door lock switches inside the vehicle. The best place to insert the diode is at the
keyless entry module itself or at the relays.
door lock learn routine
Before the unit will respond to the factory remote keyless system, it must learn the polarity of the door lock
wires. To learn the lock polarity:
1. Open the vehicle door.
2. Turn the ignition to the “on” position.