Hypertec ISDN 10T Router - Manual (Page 37)

Configura
30
Quick Configuration Menu
The Quick Config (see Figure 0-4, Quick Config Menu) is the first menu you will see after completing
the login dialog box.
There is only one sub-menu, Internet, for Quick Configuration menu.
If you have successfully logged into the router, you should see most fields in this page containing data;
if this is not the case, it indicates communication problems between NMS and the Hypertec Router.
See diagnostics hints in Chapter 5 if you run into such a problem.
For most users, the “Quick Config” menu is the only menu required to be entered for normal Internet
Access. The other menus such as “Local”, and “Statistics” are useful for diagnostics and advanced
management purposes.
Local Router Name
The local router name is the name assigned to this ISDN router. Any text character is acceptable up to 32
characters. The local router name is required by the ISP whenever you dial into your ISP’s point of
presence as part of the authentication procedure. It may be assigned to you by your ISP. Upper case or
lower case characters are significant for this field.
ISP Router Name
The remote router name is the name assigned to the remote router located at your ISP site. Any text
character is acceptable for up to 20 characters. The remote router name is used during the call-in
authentication process, and is not required when you want to dial into your ISP’s point of presence. In
general, your ISP assigns to you a remote router name for administration and reference purpose.
Figure 0-4, Quick Config Menu