Remote router name – Hypertec ISDN 10T Router User Manual

Page 53

Advertising
background image

Configura

46

The Intranet PPP sub-menu is shown in fig 4.14. This menu is used to configure the PPP parameters for an
Intranet connection.

Figure 0-12, Intranet PPP Window

Remote Router Name

The remote router name is the name assigned to the remote router located at the ISP end. Any visible
ASCII characters are acceptable. The remote router name is not required when you want to dial into your
ISP’s point of presence. In general, your ISP will assign you a remote IP address for administration
purpose.

Compression

The compression field specifies if the Stac compression protocol is to be used for the Internet

connection.

Advertising