Local ip mask, Dial (isdn) number, Encapsulation protocol – Hypertec ISDN 10T Router User Manual
Page 38: Compression, Network address translation enable, Dial-out authentication, Dial-out password
Configura
31
Local IP Address
The local IP address is the IP address assigned to this router. The IP address is entered in the standard
IP address format of a.b.c.d. The local IP address is required during the PPP negotiation. Please ask
your ISP if you don’t possess one, unless you have a connection with dynamic IP address allocation.
You would need to reset the router if this field gets changed.
Local IP Mask
The local IP mask is used to describe the local IP sub-netting. The IP mask is entered by clicking the IP
address bit map. The number of bits assigned for the IP subnet is shown next to the IP address bit map as a
decimal number for your reference. You would need to reset the router if this field get changed.
Dial (ISDN) number
The remote ISDN number is the ISP’s ISDN number you want to dial to gain access to the Internet. Your
ISP will provide you a list of ISDN numbers for you to choose from. In North America, the dialing of a ‘1’
followed by 10 digits is required in order to access the clean 64K BPS ISDN B channel(s). There should
be only digits in this field, no space or other terminators are acceptable.
Encapsulation Protocol
The encapsulation protocol specifies the protocol you want to run over the data channel. Select PPP, if you
want to run single channel PPP. Select MLPPP, if you want two channel PPP.
Compression
The compression field specifies if the Stac compression protocol will be turned on for the Internet
connection.
Network Address Translation Enable
This field enables or disables the NAT function. This configuration becomes effective immediately after
setting.
Dial-out Authentication
The dial-out authentication field specifies which protocol you want to run as the PPP/MLPPP
authentication protocol when you initiate an ISDN call to your ISP. Most ISPs support PAP and CHAP
protocols.
Dial-out Password
The dial-out password specifies the password to use during the dial-out authentication process. This field
is case sensitive, and is given to you by your ISP.