Hypertec ISDN 10T Router - Manual (Page 40)

Configura
33
Dial-out Authentication
The dial-out authentication field specifies which protocol you want to run as the PPP/MLPPP
authentication protocol when you initiate an ISDN call to your ISP. Most ISPs support PAP and CHAP
protocols.
Dial-out Password
The dial-out password specifies the password to use during the dial-out authentication process. This field
is case sensitive, and is given to you by your ISP.
Call-in Authentication
The call-in authentication field specifies which protocol you want to run as the PPP/MLPPP authentication
protocol when the ISP initiates an ISDN call to you. In normal operation, your ISP will not initiate a call
to you.
Call-in Password
The call-in password specifies the password to use during the call-in authentication process. This field is
case sensitive.
Local Menu
The local configuration contains the detailed local configuration information of this
router. Under the local configuration, there are three sub-menus : Ethernet, ISDN, IP,
and DHCP (server).
Local Ethernet Sub-menu
This Ethernet menu describes the Ethernet aspects of the local configuration. Some of the fields are linked
to the menu “Quick Config”.