HP STORAGEWORKS SSL1016 - Manual (Page 51)

Installation and Configuration
51 SSL1016 Tape Autoloader Reference Guide
7. At each position of the gateway address, scroll to the correct number and press
Enter to advance your cursor.
Figure 30: Setting the gateway address
Note: Use Escape to backspace to a previous text box, if necessary.
When you have set the gateway address, the autoloader displays Enter to save.
8. Press Enter.
GW changed appears on the display. You do not need to reboot the
autoloader.
9. Press Escape or Enter to return to the menu.
SNMP Server
An SNMP server monitors a network by processing reporting activity in each
network device (hub, router, bridge, and so on). The server uses this information
to define what is obtainable from each device and what can be controlled (turned
off, on, and so on).
To set an SNMP server:
1. On the main menu, scroll to Configuration. (See Figure 25 .)
2. Press Enter.
3. On the Configuration submenu, scroll to Ethernet. (See Figure 26 .)
4. Press Enter.
5. On the Ethernet submenu, scroll to Set SNMP Server. (See Figure 27 .)
6. Press Enter.
Default Gateway:
016.117.065.001