HP STORAGEWORKS SSL1016 - Manual (Page 86)

Autoloader Operation
86 SSL1016 Tape Autoloader Reference Guide
4. Carefully insert the end of a small, sturdy tool, such as a jeweler’s
screwdriver, about one inch into the opening. On a right magazine, keep the
tool as far to the left as you can. On a left magazine, keep the tool as far to the
right as you can.
5. On a right magazine, slide the tool to the right. On a left magazine, slide the
tool to the left. You will feel resistance as the tool presses against the latch.
Press hard enough to release the latch.
Figure 58: Inside release latch
When you release the latch, the magazine pops forward so that the front of the
magazine is no longer flush with the front panel.
6. With one hand, grasp the magazine by the handle and slide it forward to
remove. Place your other hand under the magazine to support it and prevent it
from falling.