Harley-Davidson CLASSIC CHROME H4808 - Manual (Page 17)

17
Assembly
Wire Cover
Switch
Switch
Peg
• Fit the wrapped portion of the handlebar harness into
the wire cover.
• Fit the tab on the wire cover into the notch in the switch
to lock the two parts together.
Handlebar
Harness
25
Right
Handlebar
• Locate the right handlebar. The right handlebar has an
additional hole in the grip area.
• Fit the switch to the right handlebar, making sure the
screw hole in the switch aligns with the screw hole in
the right handlebar.
Switch
Cover
26
• Fit the peg on the right mirror through the hole in the
right handlebar and the switch.
• While holding the two parts firmly together, insert
two #8 x 3 /
4
" screws into the switch and tighten.
28
Wire
Cover
Tab Switch
Notch
Additional Hole
in Grip Area
Right Handlebar
• Fit a mirror lens to the right mirror.
• Insert a #8 x 1 /
2
" screw through the right mirror into the
mirror lens. Tighten the screw.
• Repeat this procedure to assemble the other mirror lens
to the left mirror.
Right Mirror
Mirror Lens
27
Back View