HONDA Outboard Motor BF5A - Manual (Page 46)

44
Gear Case Oil Change
SERVICING YOUR OUTBOARD MOTOR
If no oil flows from the oil level hole,
add the recommended oil (p.
)
following the procedure described in
Gear Case Oil Change. Change the gear case oil with the
engine stopped and the outboard
motor in the vertical position.
Place a suitable container below
the oil drain hole to catch the used
oil, then remove the oil level screw
and oil drain screw.
Allow the used oil to drain
completely, then install an oil
pump adapter in the oil drain hole.
If water or contaminated (milky-
colored) oil flows out the drain
hole when the screw is removed,
have the outboard motor checked
by an authorized Honda marine
dealer.
1.
2.
45
07/01/08 13:10:55 31ZV1630_045