HP 2200 - Manual (Page 52)

use the fax features 46
hp psc 2200 series
• Press a button multiple times to see a letter first in lowercase and then
in uppercase. The first letter of a word is upper-cased automatically.
.
• After the correct letter appears, press , then press the number that
corresponds to the next letter in the name. Again, press multiple times
until the correct letter appears.
• The cursor automatically advances to the right 1.5 seconds after the
last button is pressed.
• To insert a space, press Space (#).
• To enter a symbol, such as @, press Symbols (*) repeatedly to scroll
through the list of available symbols, which are: *, -, &, ., / (), ‘, =, #,
@, _, and !.
• If you make a mistake, press to clear it, then make the correct entry.
• After you are done entering text, press Enter to store your entries.
reprint the faxes in memory
Your HP PSC can store a limited number of fax pages in its memory, with
the number of pages depending on the model you purchased. When your
HP PSC runs out of memory to store faxes, it will not receive any more until
the stored faxes are printed.
Reprint Faxes in Memory enables you to reprint a fax stored in memory. For
example, if your print cartridge runs out of ink while receiving a fax. This
option prints all faxes in memory; press Cancel to stop printing faxes you do
not need.
1 Press Setup.
2 Press 5, then press 4.
This selects Maintenance, then selects Reprint Faxes in Memory.
The faxes are printed from memory.
learn more
See the fax section in the hp photo & imaging help to learn more about:
• setting up speed dials
• using the fax wizard
6Q IGV VJKU EJCTCEVGT
2TGUU  VJKU OCP[ VKOGU ,-.

L
 M
 N
 ,
 -
 .