3 advanced user configuration – Hitachi HANDYTONE-486 User Manual
Page 24
HandyTone-486 User Manual
Grandstream Networks, Inc.
24
Total SIP Message
Received:
13
Total RTP Packet Sent: 0
Total RTP Packet Received: 0
Total RTP Packet Loss: 0
All Rights Reserved Grandstream Networks, Inc. 2005
MAC Address
The device ID, in HEX format. This is very important ID for ISP
troubleshooting.
WAN IP Address
This field shows WAN port IP address.
Product Model
This field contains the product model info, such as HT486 Rev:2.0
Software Version
Program: This is the main software release. This number is always used for
firmware upgrade. Current release is 1.0.8.32.
Bootloader: current version is 1.0.8.11.
HTML: current version 1.0.8.32.
VOC: current version is 1.0.0.12
System Uptime
This shows how long the device has been up since the last reboot.
Registered
This shows whether the unit is registered to service provider’s server or not.
PPPoE Link Up
This field shows whether the PPPoE connection is up if the HandyTone
ATA is connected to DSL modem.
NAT
This shows what kind NAT the HandyTone ATA is connected to via its
WAN port. It is based on STUN protocol.
NAT Mapped IP
WAN side public IP if connected to LAN of a SOHO router.
NAT Mapped Port
WAN side SIP port if connected to LAN of a SOHO router.
Other Statistical
Status of ATA
Self explainable, please see the page displayed.
6.2.3 Advanced User Configuration
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030