Hitachi HANDYTONE-486 - Manual (Page 36)

HandyTone-486 User Manual Grandstream Networks, Inc.
36
6.2.5 Rebooting the HandyTone-486 from remote
The user/administrator of the HandyTone-486 can remotely reboot the HandyTone-486 by pressing the
“Reboot” button at the bottom of the configuration page. Once done, the following screen will be
displayed to indicate that rebooting is underway.
Grandstream Device Configuration
The device is rebooting now...
You may relogin by clicking on the link below in 30 seconds.
Click to relogin
All Rights Reserved Grandstream Networks, Inc. 2005
6.3 Configuration through a Central Server
Grandstream HandyTone ATAs can be automatically configured from a central provisioning system.
When HandyTone ATA boot up, it will send TFTP or HTTP request to download configuration file,
“cfg000b82xxxxxx”, where “000b82xxxxxx” is the MAC address of the HandyTone ATA.
The configuration files can be downloaded via TFTP or HTTP from the central server. A service
provider or an enterprise with large deployment of HandyTone ATA can easily manage the
configuration and service provisioning of individual devices remotely from a central server.
Grandstream provides a licensed provisioning system called GAPS that can be used to support
automated configuration of HandyTone ATA. GAPS (Grandstream Automated Provisioning System)
uses enhanced (NAT friendly) TFTP or HTTP (thus no NAT issues) and other communication
protocols to communicate with each individual HandyTone ATA for firmware upgrade, remote reboot,
etc.
Grandstream provide GAPS (Grandstream Automated Provisioning System) service to VoIP service
providers. It could be either simple redirection or with certain special provisioning settings. Initially
upon booting up, Grandstream devices by default point to Grandstream provisioning server GAPS,
based on the unique MAC address of each device, GAPS provision the devices with redirection
settings so that they will be redirected to customer’s TFTP or HTTP server for further provisioning.
Grandstream also provide GAPSLite software package which contains our NAT friendly TFTP server
and a configuration tool to facilitate the task of generating device configuration files.
The GAPSLite configuration tool is now free to end users. The tool and configuration template are
available for download from
http://www.grandstream.com/DOWNLOAD/Configuration_Tool/.
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030